Professional Mover’s Guide on How to Pack Glasses

By July 13, 2021 Packing

Packing breakable items is a difficult matter.

This can slow down the packing process and moving in general.

Among the ordinary breakables is glassware. People have a hard time packing them because of their fragility.

Broken glasses can cause injury. Even small chipped rims or cracked stems can lacerate a person. These damaged portions are open threats to anybody who might walk on or touch them.

To prevent these dangers from happening, a simple yet effective guide on packing glasses is crucial.

Let us have a clean look at the vital steps on how to pack glasses for moving.

How to Pack Glasses

1. Prepare a chip-proof box.

Boxes are essential packing materials whatever their contents are. In packing glasses, choose a dish barrel box. It is a double-walled box where breakables have individual rooms. This is thicker than regular boxes and offers extra padding. If you are looking for an alternative, a modified ordinary box will do. Utilize a box for liquor or heavy cans. To make the box break-proof, add pieces of torn cartons. Also, stuff shredded pieces of packing paper or newsprint in the ‘wall sides’ and the bottom of the box. This adds a coat of protection in case of the box bumps with another object or falls into the ground. Tape the corners, flaps, and folds so that the box can hold what is inside even if it is heavy.

2. Begin with the big glasses.

Wrapping the big glassware takes most of the time. These glasses are heavy and consume wider space. Before placing them inside the box, fill them in with pieces of packing paper or carton for cushioning. Furthermore, use bubble wrap for each glass. You may tape thick pieces of cartons around the glasses as alternatives to bubble wraps. If the glasses are heavyweight, roll small short towels around them until there are no loose ends. Be sure that the rim and stems (if there are) have complete covers. Styrofoam-based packing materials are also a good option for this. As much as possible, place the glasses into boxes exclusive to them.

3. Wrap similar glasses.

Learning the points on how to pack glasses for moving speeds up everything. To do so, wrap glasses with the identical size as the big glasses. Roll them into a thick sheet of paper or a towel. Let their bases stand on the bottom of the box. Putting them in a vertical position gives them base strength so they would refrain from falling out of balance and hit other glasses. Cover the rims and stems with appropriate pieces of paper so they remain protected from chips and dents. If you plan to put these glasses in a big box, make sure that you create layer after layer. Between the layers, place a demarcating and cushioning divider made of a piece of carton or fiberboard. Do not make more than three layers of glasses.

4. Stuff and fill.

Keep wrapping the glasses with pieces of carton or thick paper. Tape them properly – tight enough for the glasses not to slip but loose enough to plump and add cushion. You may put single or double packages for a spare sheet of protection. Place larger and heavier glasses on the bottom and the smaller and lighter glasses on the top layer. If the glasses produce a clunking sound, add and add more layers until such time that no noise is heard. Maximize the use of newsprints and recyclable paper materials. Crumple or wrinkle the paper package and layers to bolster the hard portions.

5. Add caution and cushion to special glasses.

Special glasses such as wine glassware and water goblets need special packing. These glasses have thinner and more brittle rims and stems. For these to have a better layer of protection, the stems should have paper rolls or bubble wraps. Proper stacking should also be observed. You should wrap stemmed glassware one by one. If you are not using a dish barrel box, make sure that each stemmed glass stands properly and has a paperboard divide. Paperboards are lightweight yet durable material for cushioning. Always fill the glass and the spaces in with pieces of crumpled paper.

6. Seal and label the boxes.

Seal the boxes with at least two-inch duck packing or strapping tape. Choose the sticky types so the boxes will be sealed fit. You can tie heavy boxes with 1⁄4-inch nylon ropes so that their flaps will not open during carrying and carting. After sealing the boxes, label each box. Labelling helps in identifying the contents. Categorise the boxes according to their types, fragility, and hardness. For example, glasses with stems and thin rims should be labelled as stemware or stemmed glasses. You also need to mark heavy glassware so that it would be placed at the bottom of the boxes. In addition, light and small glasses must be labelled properly to put in top layers of stacks.

7. Do the final packing touches.

Double-check the boxes if they have loose flaps, corners, and folds. Re-tape them if necessary. Make sure that the corners are either taped or tied. The ties for the heavy boxes should not have long loose ends. Group the boxes according to their types and labels. This will cut time for carting and stacking.

House Removal Services

Packing glasses consume a ton of time and effort. Not knowing the tips and ways on how to pack glasses for moving delays the moving process. To make glass packing easier, hire a reputable and house removal professional company like Flash Local. We have the talent and experience fit for your house removal needs. We offer all the services such as storage solutions and trucking facilities to keep the moving smooth. In addition, the moving experts can help in boxing and unboxing all the glass-based essentials.

Leave a Reply